Description: Non-contact 3 Phase Sequence Detector Rotation Meter with Diameter 10mm40mm Note: Battery cannot be included during the shipping !!! Introduction: Non-contact Phase Sequence Detector with non-contact phase sequence detection, live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search and other functions, can clamp the wire with outer diameter 1.6mm16mm, When using, the insulation clamp can be directly clamped on the insulation skin of the live wire to test, no need to stripping off the wire or touching the exposed live wire of high voltage. The measurement result is dynamic display of LED, which is very clearness and directness, improves the safety and convenience of the test, and practically protects the personal safety of the operators. The bottom plate of the instrument is equipped with magnets, the instrument can be attached to the metal shell of the equipment in the test, which makes the operation more convenient. The three clamps adopt 3 colors of the out shell, which is more in line with the distinction of three-phase line and the national standard (GB681). Function: Phase sequence detection (positive phase, anti-phase, default phase), live line inspection, simple electrical inspection, fire line identification, default phase judgment, broken line location search, DC line breakpoint detection, line maintenance. Phase Sequence State: dynamic acousto-optic indication Line voltage: 70~1000V Clamp wire diameter: 10mm40mm Specification: Power Supply AA batteries (LR6) 2 PCS (not included) CT Jaw Size Can clamp and test wire diameter 10mm40mm LCD Size None Detect Voltage Range AC701000V Auto Shut Down After 5 minutes, the meter auto shut down without any operation Working Temperature -10~50; below 80%rh Store Temperature -2060; below 90%rh LED Display Positive phase sequenceThe four phase detector lamp lights up clockwise Negative phase sequenceThe four phase detector lamp lights up counterclockwise live-voltage indication L1, L2, L3 lamps light up in setting voltage range Default phase L1 or L2, or L3 lamp is not lighting Open circuit L1 or L2, or L3 lamp is not lighting Beep Indication Positive phase sequencethe meter make short beep sound intermittently Negative phase sequencethe meter make long beep sound continuous Battery Check The POWER indication lamp light up after boot up; the LOW BATTERY lamp light up when low battery Magnet 4pcs magnets are installed on the bottom plate of the instrument, which can be attached to the distribution box and load weight 800g Clamp Lead Length 0.6m Maximum Measurement Voltage AC1000V Insulation Strength 5.4kVrms Maximum Rated Power 300mVA Suitable Safety Standard EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT (600V) Meter Weight 200g (with battery) Meter Dimension 70mm75mm30mm Package Meter 1pcs Cloth Bag 1pcs Manual 1pcs Certificate 1pcs Warranty Card 1pcs Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!