Feature: 1. High Performance Home Charging Station: Compared with public charging stations, the charging speed can be increased by 5?7 times. The output current of 32A and the super power of 7KW make the charging time faster, keep your car in a fully powered state, and drive your car anytime, anywhere. 2. High Compatibility Charging Head: US?standard 5?hole charging head, which can adapt to all vehicles with US?standard 5?hole charging head, and all products have passed CE, CQC, SAE J1772, TUV certification, which is a safe, efficient, and reliable of charging station. 3. 9 Safety Protections: overvoltage protection, undervoltage protection, overload protection, short circuit protection, leakage protection, grounding protection, overtemperature protection, low temperature protection, lightning protection design, can avoid the charging danger caused by the AC charging process, avoid the Injury to vehicles, people, etc. 4. IP65 Waterproof Rating: Even in rainy days, it can safely charge the car. The mean time between failures is as high as 8760 hours, so there is no need to worry about product failures during use. The charging cable as long as 8.5M can charge the car in a wide range without worrying about the inconvenience caused by the short charging distance. 5. Superior Quality: The main body of the charging station is made of aluminum alloy body. The excellent material makes the main body of the charging station light and has a high level of protection, and is not afraid of damage to the main body caused by daily use. Specification: Item Type: Car Charger Station Material: Aluminum alloy + rubber Input Voltage: US 110V Input Frequency: US standard 60Hz Maximum Power: 7KW Output Voltage: US 110V Output Current: 32A Rated Current: 16A Standby Power Consumption: 6W Wall-mounted Backboard Size: Approx. 190 x 150 x 10mm/7.48 x 5.91 x 0.39inApplicable Scene: Indoor/outdoor Body Working Temperature: -30??-+55?? Waterproof Grade: IP65 Cooling Method: Natural cooling Mean Time Between Failures (MTBF): 8760HStandard Certification Types: CE, CQC, SAE J1772, TUVInstallation Notes:1. Locate the hole according to the size of the wall?mounted backboard, punch a hole of 4?6x35mm, and insert the expansion pipe;2. Lock the 4?M4x32 self?tapping screws into the expansion pipe, and fix the wall?mounted backboard to the wall.3. Hang the charging pile on the wall?mounted backboard;4. Reserve a 3x6mm? power cord for the charging pile, and connect it to the mains according to the corresponding line code. Instructions for charging:1. Insert (connect the charging pile);2. Turn on the charging (method 1: start charging when inserted; method 2: use the specified charging card, the green light flashes and the charging is normal);3. Method 1: Pull out to end charging; Method 2: Use card to end charging;4, Unplug, return. Equipment power?on inspection and debugging instructions:1. Check before operation;2. The installation position of the AC pile should be convenient for operation and maintenance;3. Ensure that the AC pile power cord is properly connected and installed firmly;4. The equipment is powered on;5. Close the leakage protection circuit breaker of the incoming power line;6. Normal standby: the green light is always on;7. Equipment failure: red light status.. Package List: 1 x Charging Station1 x Storage Bracket1 x Wall Bracket8 x Screw8 x Expanded Rubber Tube1 x Manual2 x Charging Card Note: 1. For the first installation, pay attention to the one?to?one correspondence between the power wires of IN?L (live wire), IN?N (neutral wire), and PE (ground wire), and the live wire and neutral wire cannot be reversely connected;2. PE (grounding wire) needs to be grounded reliably;3. After power?on, make sure the emergency stop switch is in the pop?up state;4. Before charging, ensure that the head is free of stains and water;5. When charging is prohibited, place the charging station in the car;6. It is strongly recommended to install by a professional mechanic;7. If you have any questions during the installation process, please contact our after?sales customer service in time to help you complete the installation and upgrade;8. For column?type installation, you need to purchase additional floor?standing columns. If necessary, you can contact customer service. Floor column size: Approx.116x40x1452mm/4.57x1.58x57.17in ( LxWxH ).9. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.