Feature:1. FULL CHIP DESIGN: All internal components of the inverter are chip design, which greatly increases the stability of the machine.2. EASY TO OPERATE: Humanized keyboard design and digital display make the vector converter easy to operate, convenient to use.3. FAST HEAT DISSIPATION: The inverter has a large heat sink, and a fan. So that the inverter possesses a fast heat dissipation.4. ABS MATERIAL: Made of premium ABS material, the inverter is impact resistant, heat resistant, flame retardant, ensuring a long life span.5. BRAKE UNIT: The inverter is designed with RS485 communication and a brake unit for emergency brake.Specification:Item Type: Frequency ConverterMaterial: ABSStorage Temperature: - 25 to +55 Input Voltage: Single phase 220-240V ACOutput Voltage: Three phase 0-240V ACOutput Current: 20ABraking Resistor Selection:Braking Resistance Power: 1000WBraking Resistance: 75 Use Instruction: 1. Before wiring, please confirm whether the input power supply is powered off.2. The wiring operation shall be carried out by professional electrical engineering personnel.3. The grounding terminal must be grounded.4. After the emergency stop circuit wiring is completed, be sure to check whether the action is effective.5. The output line of the frequency converter must not be connected with the housing, and the output line must not be short circuited.6. Please confirm whether the voltage of AC main circuit power supply is consistent with the rated voltage of frequency converter.7. Do not carry out voltage withstand test on the frequency converter.8. Please connect the braking resistor according to the wiring diagram.9. Do not connect the power cord to the output U, V, W terminals.10. Do not connect the contactor to the output circuit.11. Be sure to install the protective cover before powering on. When removing the cover, be sure to disconnect the power supply.12. Select the frequency converter with reset and retry function, and keep away from mechanical equipment. Because the alarm will suddenly restart when it stops.13. The alarm can be reset only after confirming that the operation signal is cut off. When the alarm is reset under the operation signal state, the converter may start suddenly.14. Do not touch the terminals of the converter. There is high voltage on the terminals, which is very dangerous.15. Do not change wiring and terminal disassembly during power on.16. Cut off the power supply of the main circuit before inspection and maintenance.17. Do not modify the frequency converter without authorization..Package List:1 xFrequency Converter1 x Manual