Feature:1. MAIN FUNCTION: SA6 is a simple portable spectrum analyzer and signal source designed to display the signal spectrum within the frequency range of 35 to 6200MHz. The analyzer identifies the amplitude and frequency of the spectral components of the analyzed process.2. MULTIFUNCTIONAL: The spectrum analyzer can process signals from all widely used technologies, such as Wi Fi, 2G, 36, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.3. ADDITIONAL FUNCTION: Making it possible to measure the frequency response of passive or active devices (such as filters or amplifiers). This software allows for measuring SWR and return loss modules. This requires an external directional coupler and a set of calibration measures.4. MAINLY USED FOR ON SITE OPERATION: The equipment is sturdy and durable, lightweight, and low in energy consumption. Enables the service center and maintenance shop to perform on site analysis for debugging and repair work. In addition, the spectrum analyzer is a solution for maintenance workshops and radio enthusiasts.5. PERFORM FOLLOWING OPERATIONS: Place an external antenna on the base station, quickly analyze the RF environment, check the correct operation of the relay cell, and repair and adjust relays, generators, filters, etc. Measure SWR when using an external directional coupler(without).6. 2 CONTROL METHODS: Through buttons on the device and touch screen. The data between the analyzer and the PC is transmitted through a USB cable. All measurement data is displayed in real time on the screen of the device or PC.Specification:Item Type: Spectrum AnalyzerMaterial: Aluminum AlloyMode: SA6Performance Parameters:3.2in color resistive touch screenWide Frequency Range: 35 to 6200MHzFast Scanning of Frequency Range: 500 points per pointHigh Measurement Accuracy: 2dB within the dynamic range of 70 to 75dBCompatibility of for Windows based computersCan use the device with the help of a PCExtremely convenient to useIndependent power supply for up to 4 hours of uninterrupted operation, wired data transmission to PCSpecifications:Display Frequency Range: 35-6200 MHzMeasurement Frequency Range: 35-4500 MHzDynamic Range of 35-3000 MHz: 75 dBDynamic Range of 3000-4500 MHz: 70 dBMaximum Span: 6165 MHzBandwidth: 200 kHz, fixedScan Speed for Frequencies Above 100MHz: 700MHz/secScan 100 MHz: Less than 0.25 secondsBackground Noise Up to 3000MHz: Less than -100dBmBackground Noise 3000-4500MHz: Less than -95dBmBackground Noise 4500-6200 MHz: Less than -90dBmWave Impedance: 50 ohmsStanding Wave Ratio Within the Operating Frequency Range: Less than 1.5Internal Attenuator: 0-30 dBError at Attenuation Up to 10 dB: 2 dB10 to 20 dB Attenuation Error: 5 dB20 to 30 dB Attenuation Error: 8 dBTracking Generator Output Power: -15 to -25 dBmAccuracy Within Dynamic Range: 2.0 dBMaximum Input Power of Attenuator at 0 dB: 10 dBmMaximum Input Power When Attenuation Exceeds 20dB: +20dBmMaximum Input Measurement Signal: +10 dBmMaximum Current Consumption When Running on Battery: 450 mAMaximum Current Consumption When Running From USB: 500 mA (during charging)Battery: Lithium ion battery (shipped with built in battery) Capacity: 3000MAHDuration: 4 hoursBattery Charging Time: 2 hours.Package List:1 x Spectrum Analyzer 1 x Resistive Stylus 1 x Type C USB 1M/3.3FT Data Cable 2 x 30CM/11.8in SMA Extension Cable 1 x SMA KK Passed 1 x Manual