Product introduction:

Description:

Level 1 Warning: Indicator lamp is always on.

Level 2 Warning: Indicator lamp flashes + Buzzer emits prompt tone.

1.BSD Pre-warning (Detection range: Horizontally 4 meters/13.12ft, longitudinally 15 meters/49.21ft). Working Logic: Vehicle's own speed is higher than 10Km/Hour, BSD pre-warning mode is started:

A.If the target object enters the radar signal area with the faster speed (the turn signal lamp of this vehicle is not turned on), it will produce the Level 1 Warning until the target object leaves the monitoring area, and the warning is canceled.

B.If the target object enters the radar signal area with the faster speed (the turn signal lamp of this vehicle is turned on), it will produce the Level 2 Warning until the target object leaves the monitoring area, and the warning is canceled.

2.LCA Vehicle Approaching Pre-warning (Detection range: Horizontally 4 meters/13.12ft, longitudinally 50 meters/164.04ft). Working logic: Start after powering on, the target object enters the alarming range and the relative collision time3.5 seconds, LCA vehicle approaches the pre-warning mode is started:

A.When the target object enters the alarming scope (the turn signal lamp of this vehicle is not turned on), it will produce the Level 1 Warning until the target object leaves the alarming area, and the warning is canceled.

B.When the target object enters the alarming scope (the turn signal lamp of this vehicle is turned on), it will produce the Level 2 Warning until the target object leaves the alarming area, and the warning is canceled.

3.AOA Overtaking Pre-warming (Detection range: Horizontally 4 meters/13.12ft, longitudinally 15 meters/49.21ft). Working logic: Vehicle's own speed is higher than 10km/Hour, AOA overtaking pre-warning mode is started:

A.This vehicle positively overtakes the other vehicles with speed and the target object is within the alarming scope, it will produce the Level 1 Warning until the target object leaves the warning area, and the warning is canceled.

B.This vehicle positively overtakes the other vehicles with speed, the target object is within the alarming scope and the turn signal lamp on the corresponding side is turned on, it will produce the Level 2 Warning until the target object leaves the alarming area, and the warning is canceled.

4.RCT Reversing Pre-warning (Detection range: Horizontally 5 meters/16.40ft, longitudinally 5 meters/16.40ft). Working logic: Put into R (reversing gear), RCT revering pre-warning mode is started: When the target object enters the alarming scope, it will produce the Level 2 Warning until the target object leaves the alarming area, and the warning is canceled.

Specifications:

Applicable conditions: Universal (There must be no metal objects in front of the 2 radar signals to block the radar).

Working voltage: 8-36V

Operating frequency band: 77-81Ghz

Working temperature: -40℃ to 85℃/-40℉ to 185℉

Power consumption: 2W

Waterproof level:IP67

Distance resolution: 0.5m

Range accuracy: Superior to 0.18m

Transceiver antenna: dual-transmit and four-receive

Radar chip: TI

MCU chip: ST

Note:

It is recommended that the installation be carried out by professionals.

The installation angle of radar will affect the detection distance and effect. Please install it strictly according to the instructions.

Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 10-30mm.