Feature:1. Ultrasonic working time is 1-99 minutes, heating temperature is up to 80 C, suitable for different occasions.2. Adopts most advanced bonding process, no tank piercing, no nail mark or falling off of tank.3. Use safe and efficient transducers to improve conversion efficiency and safety performance.4. The shell is made of high-quality anti-fingerprint stainless steel embossed plate, which is beautiful and generous.5. The cleaning tank is made of high-quality stainless steel in one press, without welding, and has better waterproof performance.6. Using high-quality components, high ultrasonic efficiency, strong power and good cleaning effect.Specification:Item Type:Ultrasonic CleanerModel: 360HTDType: Digital Timing HeatingInner Tank Capacity: 6.5LInner Groove Size: 300 x 155 x 150mm / 11.81 x 6.1 x 5.91inUltrasonic Frequency: 40KHzUltrasonic Power: 180WHeating Power: 300WNumber of Vibration Heads: 3Working Time Range: 1-99MinTemperature Range: 0-80 CLiner Material: SUS304 Stainless SteelShell Material: Stainless SteelBasket: EquippedSound Reduction Cover: EquippedFunction:Glasses, rings, coins, jewelry, industrial parts, hardware tools, watches, dentures, surgical instruments, PCB boardsInstruction:1. After unpacking, shake the machine slightly and listen to the sound in the chassis to confirm whether the parts are loose.2. Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position;3. Add an appropriate amount of cleaning solution (2/3 groove depth <L<3/4 groove depth) as required for cleaning;5, adjust the ultrasonic working time:After the power is turned on, the right digital screen displays 0700 to indicate that the default setting time is 7 minutes and 00 seconds. Each time the TIME+ or TIME- button is pressed, the time is increased or decreased by 1 minute. After the button is set, press the ON/OFF button, the ultrasonic starts to work, and the digital timer counts down. The time setting of this unit has a memory function. After the set time has elapsed, press ON/OFF repeatedly, and the machine will continue to work according to the time set by the previous time.6. Adjust the working temperature (select heating if necessary; mechanical type without heating):The left digital screen displays 50 and the actual temperature XX, indicating that the default setting temperature is 50 . Each time the TEMP+ or TMEP- button is pressed, the temperature is adjusted up or down by 1C. After the button is set to the operating temperature, press the ON/OFF button and the heating part starts to work. (The heating function can be freely switched, which is another feature of this machine)7. Shut down after completing work:After the cleaning work is completed, if it is not necessary to operate, the heating part should be turned off 1th, and the power supply should be disconnected. After the cleaning liquid is cooled to normal temperature, the cleaning liquid is drained, and the inner tank and outer casing are wiped clean. The used machine should be placed dry. Ventilation to avoid moisture in the control circuit.Q: What is an ultrasonic cleaner?A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. Bubbles are smallThrough to penetrate microscopic crevices, cleaning them thoroughly and consistently.Q: Which products can I clean this model?A: Many products can be cleaned. Common such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, razor heads, nibs, coins, badges, pacifiers, etc.Q: Which builders can be properly added for better cleaning and cleaning during the cleaning process?A: You can add cleaning liquid or detergent, such as: detergent, soapy water, disinfectant, etc., but do not add acidic or alkaline solution to the machine to prevent ABS corrosion damage.Package List:1 x Cleaner1 x English Users Manual1 x Power CordNote:1. When the ultrasonic is in normal operation, the uniform sound of the ultrasonic and the tank body should be heard, and the surface of the cleaning liquid is not excited. Only the ripple caused by the hole blasting, if there is intermittent oscillation, please add a little cleaning liquid or discharge a little cleaning liquid. Eliminating the oscillations helps to clean the objects;2. Under the premise of ensuring that the cleaning objects are clean, work as intermittently as possible and not warm, because the warming and long-time ultrasonic work will increase the temperature inside the chassis, and it is easy to accelerate the aging of the electronic device;3. Never use flammable and corrosive detergents;4. When there is no proper amount of cleaning liquid in the cleaning tank, the heating and ultrasonic waves must not be turned on;5. Prevent the cleaning fl