Happymodel CINE8 85mm Brushless Cinewhoop DIY KIT EX1202.5 KV8000 4in1 ESC MCU upgraded to EFM8BB21 5.8G 400mw VTX Caddx ANT 1200tvl camera

Happymodel CINE8 85mm Brushless Cinewhoop DIY KIT 

This Kit is very easy to build , no solder work any more, just assemble then plug and play .  

    Very cheap but equipped with high-performance and stable components. The frame is formed by high-precision TPU 3D printing, fixed with carbon fiber board and the use of integral foam to prevent collision. Every FPV pilots could enjoy the fun of building their own FPV Cinewhoop.

    Features:

No Solder work need and easy to build

Very reliable and resistant to drops

Stable and smooth flying

Insta360 fixed mount ready 

Smooth and powerful 

    Diversity SPI Receiver compatible Frsky/S-FHSS/Redpine protocol

    Specifications：

Brand Name: Happymodel

Item Name: Cine8

Wheelbase: 85mm

Size: 145mmx140mmx23mm

Weight: 73g(without battery)

Weight: 99g(with Insta360)

Receiver option:

Internal SPI Frsky version (Compatible with Frsky ACCST D8/D16, S-FHSS, Redpine)

External Flysky Fli14+ receiver version(Compatible with Flysky AFHDS-2A protocol radio)

External Speki+ receiver version(Compatible with Spektrum DSM2/DSMX protocol radio)

External TBS Crossfire Nano receiver version

Package includes:

Cine8 Frame*1

Option1: CrazybeeF4 V3.1 SPI Receiver version compatible FrskyD8/D16 S-FHSS*1

Option2: CrazybeeF4 V3.1 with External Fli14+ receiver*1

Option3: CrazybeeF4 V3.1 with External DSMX receiver*1

Option4: CrazybeeF4 V3.1 with External TBS crossfire nano receiver*1

Happymodel EX1202.5 KV8000 brushless motor*4

Gemfan D51(2020-4) Cinewhoop Props*1

Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera*1

5.8G 25mw~400mw Whoop_VTX_HP*1

TypeC USB Adapter*1

Tattu 3S 11.4V 450mah battery*1

Note:Insta360 go is not include.

Motor:

Mode: EX1202.5 KV8000

Configu-ration:9N12P

Stator Diamter:12mm

Stator Length:2.5mm

Shaft Diameter:Φ1.5mm

Motor Dimension(Dia.*Len):Φ14mm*14.5mm

Weight(g):4.4g

No.of Cells(Lipo):2-3S

Propellers:

Material:PC

Weight:0.91g

Pitch:2in

Props Dia:50.3mm

Center Thickness:4.5mm

Center Hole Dia:1.5mm 3 holes

Flight controller:

(Frsky SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(S-FHSS SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(Redpine SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External Flysky Fli14+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External Speki+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM

Power supply: 2-4S battery input (DC 2.9V-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Built-in Betaflight OSD(SPI Control)

Built-in 5V 1A BEC

Onboard 4in1 ESC:

MCU upgraded to EFM8BB21

Power supply: 2-4S LiPo/LiPo HV (7v/17v)

Current: 12A continuous peak 15A (5 seconds)

Support BLHeliSuite programmable

Factory firmware: F_H_40_REV16_8.HEX

Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version:

CC2500 Hardware

Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol

Channels: 8ch

Failsafe support

Diversity 2.4G receiver system

No ground interference: above 300meter

External Flysky Fli14+ receiver:

Channel: 14

Protocol: AFHDS-2A

2.4G Mode: The second generation of an enhanced version of the automatic FM digital system

Antenna Length: 50mm  (single antenna)

Input Power: 4.0-6.5V DC

Weight: Only 1g

Size: 19.5mm*12mm*5mm

Color: Black

Signal Output: IBUS

RSSI Output: Channel14

No ground interference: >500m

External Speki+ receiver:

Dimension: 20mm*12.4mm*5mm

Support protocol: DSM2/DSMX

Output Signal configuration: SRXL(Set Spektrum2048/SRXL for the serial receiver provider)

Antenna connector: I-PEX MHF3

Antenna length: 70mm

Input voltage: 3.6v~13v

Input current: 100ma

Channels: Max12ch(usually channel 12 is used for RSSI)

External TBS CRSF Nano receiver:

Original TBS CROSSFIRE Receiver  ,CRSF Protocol , Official TBS transmitter compatible

5.8G 400mw VTX:

Output power: 25mw~400mw switchable

Frequency: 40CH

Input voltage: 3.3V 5.5V

Current consumption: 400mA(type)

Frequency: 5.8GHz 5bands 40 channels

With Race band 

SmartAudio ready

Caddx ANT 1200tvl camera:

Image Sensor: 1/3" CMOS Sensor

Horizontal Resolution: 1200 TVL

TV System: NTSC or PAL 

IMAGE: 16:9 or 4:3

Synchronization: Internal

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min. Illumination: 0.001Lux@F1.2

Auto Gain Control: YES

BLC: YES

WDR: Global WDR

DNR: 3D DNR

Dimensions: 14*14mm(with bracket to 19*19mm)

Wide Power Input: DC 3.7-18V

Work Temperature: -20℃~+60℃

Weight: 2g (N.W.)