{"product_id":"led-searchlight-remote-control-flashing-sos-mode-spot-light-lamp-dc12v-24v-27w-for-boat-outdoor","title":"LED Searchlight Remote Control Flashing SOS Mode Spot Light Lamp DC12V 24V 27W for Boat Outdoor","description":"Feature:\n1. LED Searchlight: The spot light is composed of 12pcs 5W super bright LED bulb. It is very durable and energy saving. The lighting can get up to 200 feet. The lamp operates on 12V or 24V DC circuits and is equipped with overload, overheat and overspeed protection.\n2. Multi Functions: The spot light can be rotated and tilted through the wireless remote control. With flashing and SOS mode, automatic search function and reset function.\n3. Bright Lighting: Can clearly illuminate the search target and is very suitable for working at night. Equipped with wireless remote control, the remote control is very sensitive and can be controlled wirelessly within 30m.\n4. Waterproof Work: LED spot light adopts acrylic lens and IP65 waterproof PC lampshade, which can prevent low pressure water jetting from any direction. There is a PA washer at the bottom of the searchlight, which can prevent slipping and shock, and firmly fix it to your vehicle or ship.\n5. Easy to Install: For  DC12V DC24V application. Suitable for vehicles, SUVs, trucks, ships, farmland protection, ship lighting, etc.\nSpecification:\nItem Type: LED Searchlight\nModel: E016001 B\nMaterial: PC, acrylic, PA. \nOperation: Remote Control\nBeam Angle: 6 ?? 2??\nRotation: 340??\nElevating: 22?? up, 48?? down. \nRotation Speed: 8-10?? per second under 12V DC, 12-14?? per second under 24V DC. \nLifting Speed: 11-14?? per second under 12V DC, 19-21?? per second under 24V DC. \nPower Cord Length: Approx. 4m \/ 13.12ft\nPower Consumption: 27W\nLED: 12pcs 5W\nWorking Voltage: DC 12V 2.2A or DC 24V 1.1A. \nLED Color and Color Temperature: Sunlight white, 5500-6300K. \nLED Beam Angle and Luminous Flux: 120??, 160-190lm. \nEffective Luminous Flux and Power: 1600lm, 200W. \nSensing Distance: Approx. 30m \/ 98.43ft. \nRemote Control Frequency: 433 MHz\nWorking Temperature: -20?? ~ +45??. \n1000 Hours LED Lamp Life Test: The luminous flux maintenance rate \u0026gt; 90%. \nWaterproof Standard: IP65\nRemote Control Battery: 2 X 1.5V AAA, shipped without battery. \nA. Installation Instructions:\n1. The searchlight must be installed on a flat and smooth surface for optimal use. Keep the light far away from the sail, cable anchor or other positions that may cause damage to the light. You need to access the lower side of the selected location and drill at the location. Make sure there are no wires or other structures where the screws need to be drilled. \n2. In order to minimize glaring, it is best to install the lights as far ahead as possible and as high as possible. \n3. The four base mounting holes and the central harness holes on the mounting surface of the washer must be adopted in accordance with the user manual. \n4. Drill four 1\/8in pilot holes at the marked points. \n5. Please place the white circular mounting washer on the base of the lamp and ensure that the harness passes through the central hole of the washer. \n6. Pass the wire from the lamp base through the center hole of the mounting surface. Sealant can be applied around the guide hole and the harness through the installation surface. \n7. Wire Connection: The red cable must be connected to the red wire of the searchlight, and the black cable must be connected to the black wire of the searchlight. \n8. Fix the lamp on the mounting surface with the lens facing forward. Align the four holes on the lamp holder and mounting gasket with the four corner holes drilled into the mounting surface. \n9. Use four M5 self tapping screws to firmly fix the searchlight. Do not overtighten. \nB. Initial Remote Control Programming: \n1. Press and hold the PA button on the remote control. \n2. When pressing the button, connect the red wire to the positive terminal and the black wire to the negative terminal. \n3. After 10 seconds, release the button pressed. When the button is released, the remote control will be programmed. \n4. The remote control will be fully operational. \n5. To clear the previous pairing with the remote control, press and hold the CL button, then turn on the power of the light until it flashes once, and then release the CL button. Re pairing the remote control will restore all normal operation. .\nPackage List:\n1 x\nLED Searchlight1 x Remote Control1 x 4m Power Cord1 x Washer1 x User Manual\nNote:\n1. When the light is rotated to the maximum angle, please do not continue to press the rotation button on the remote control. Doing so may cause the circuit to bear excessive pressure and cause the lamp to change. 2. This spot light can only work with the attached remote control, so please do not modify the light, nor try to use the remote control of other devices to operate the energy lamps.","brand":"mickcara","offers":[{"title":"Default Title","offer_id":44356784521353,"sku":"8316634763870","price":461.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0365\/2131\/2393\/files\/3095_ede64be9-ae07-451a-847a-aa594ed7bfda.jpg?v=1751009629","url":"https:\/\/mickcara.com\/fr\/products\/led-searchlight-remote-control-flashing-sos-mode-spot-light-lamp-dc12v-24v-27w-for-boat-outdoor","provider":"mickcara","version":"1.0","type":"link"}