Precautions:   

   1. Do not charge the battery when you are away from home, do not charge the battery immediately after flying, do not over-discharge the battery (over-discharge may cause the battery to be uncharged and become useless). After the battery is fully charged, cut off the power in time and cannot charge for a long time. .   

   2. Do not modify any parameters and wiring without knowing the flight control and remote control. (It’s very important, we won’t compensate if it’s man-made damage!)   

   3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.   

   4. This product is not a toy and is not suitable for children under 14 years of age.   

   5. If you are a beginner, it is recommended to be assisted by an experienced adult.   

   6. Novices should pay attention: Do not use your hands to hold the plane when it is turning, or let children touch it. Prevent being scratched.   

   7. When the plane falls or hits other objects at high altitude during flight, please turn off the start switch in time, otherwise it may cause damage to the flight control and motor. Check if the aircraft is not damaged and the screws are not loosened, and everything is normal, you can take off again.   

  Functions and features:

     215mm wheelbase   

   Built-in OSD Betaflight   

   Support BLHeliSuit configuration   

   Support voltage 3-4S   

   7-10 minutes of battery life   

   The remote control distance (with FLYSKY remote control) is about 400 meters, (with T-PRO remote control) is about 2000 meters   .   

  Propeller:

     Model: 5043   

   Pitch: 4.3 inches   

   Material: PC   

   Weight/G: 4.63G   

   Inner diameter of center hole: 5mm   

   Paddle diameter: 13.5mm   

   Center thickness: 7mm   

  ESC:

     Working voltage: 2-6S   

   Maximum continuous working current: 45A   

   Maximum instantaneous working current: 50A   

   Support communication modes: DShot150/300/600, PWM, Oneshot125, Oneshot42 and Multshot   

   Firmware version: BL16.7   

   Installation hole distance: 20 * 20mm / 30.5 * 30.5mm   

   Product size: 44 * 44 * 5.5   

   Packing size in mm: 62 * 58 * 18 mm   

   Product net weight: 13.6 grams   

   Package weight: 27 grams   

   Image transmission:   

   Input voltage: 6-26V   

   Output voltage: 5V   

   Frequency: 5.8G   

   Frequency point: 16 points   

   Output power: 6-speed adjustable (0mW / 25mW / 50mW / 100mW / 200mW / 400mW)   

   Size: 24 * 24 * 3mm   

   Installation hole distance: 20 * 20mm   

   Weight: 2.2g   

  Motor:

     S   ize: 2205   

   Stator diameter: 22 mm   

   Stator height: 5 mm   

   Motor KV: 2300   

   Weight: 29g   

   Support voltage: 3~4S   

   Flight control:   

   Name: F4 V2   

   Size: 36x36mm   

   Mounting hole: 30.5x30.5mm   

   STM32 F405 MCU can shorten the cycle time.   

   Support SBUS / PPM / IBUS receiver mode   

   Built-in power module BEC   

  camera:

     Sensor: CMOS 1/3   

   Lens: 1.8mm   

   Video format: PAL/NTSC switchable   

   Resolution: 1200TVL   

   Input voltage: DC4.5V-25V   

   Weight: 4.5g   

   Size: 19x18.7mm(W*L)   

   White balance: automatic   

   WDR: 90db   

   Receiver version:   

   FRSKY version, FLYSKY version, without receiving version (optional)