SHT2000 Temperature Humidity Controller Thermostat Humidistat Indoor Brewing Incubator Therometer Hygrometer Thermoregulator 40%off

  SHT2000 Temperature and Humidity Controller Operating Instructions

  Product Name: Temperature and Humidity Controller    Product Model: SHT2000

  Supply voltage: AC 110~230V                                        Power supply frequency: 50/60Hz

  Temperature range: -20~60°C                                        Humidity range: 0%~100%RH

  Temperature measurement accuracy: 0.3 °C                 Humidity measurement accuracy: 3%

  Output Control: Relay Output                                         Output Power: MAX 10A

  Setting method: Start value <stop value (program automatically determines working mode is heating/humidifying mode)

  Setting method: Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode)

  Heating/cooling mode setting:

  Setting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.

  Setting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.

  Heating use case: control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again

  Step 1: heating mode, starting temperature <stop temperature

  Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.

  Step 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!

  Refrigeration use case: use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.

  Step 1: cooling mode, starting temperature > stop temperature

  Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.

  Step 3: Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature to 26°C. The setting is completed!

  Humidification/Dehumidification Mode Settings:

  Setting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.

  Humidification example: fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. 

  Setup steps:

  Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.

  Step 2: long press the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 80% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.

  Dehumidification example: workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification

  Setup steps:

  Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.

  Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.