{"product_id":"1-pcs-risc-v-milk-v-duo-development-board-dual-core-cv1800b-pcb-development-board-support-linux-for-iot-enthusiasts-diy-gamers","title":"1 PCS RISC-V Milk-V Duo Development Board Dual Core CV1800B PCB Development Board Support Linux For Iot Enthusiasts DIY Gamers","description":"\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e  [Product Introduction] Milk-V Duo is an MPU developed based on CVITEK CV1800B chip that can run LINUX and RTOS.. Milk-V Duo provides professionals,IoT enthusiasts, hobbyists, DIYers a reliable, low-cost and extremely capable platform for building and tinkering with their ideas, helping them become Reality.    \u003c\/p\u003e\n\u003cp\u003e[Product parameters] Processor: CVITEK CV1800B (906@1GHz; 906@700MHz). Memory: DDR2 64MB. Storage: 1 Mirco-SD slot, 1 SD NAND pad. USB: 1 Type-C for data and power, 1 USB2 pad. Camera: 1 16P FPC socket (MIPI CSI 2 channels). GPIO : 26 pins available for general purpose I\/O (GPIO). Size: 21mm X 51mm    \u003c\/p\u003e\n\u003cp\u003eprocessor:. 1GHz and 70OMHZ RISC-V C906 processor.Integrate CVITEK TPU to realize intelligent detection. Support H.264\/H.265 video encoding, up to 2880x1620@20fps. Compatible with HD CMOS sensors. Programmable frequency output for sensor clock. Comprehensive ISP features for image optimization. Some OpenCV libraries support CV hardware acceleration. 16-bit audio codec with built-in microphone input and output. Flexible network configuration with 1 Ethernet PHY    \u003c\/p\u003e\n\u003cp\u003eCSI-2 (MIPI Serial Camera):With 16-pin FPC interface for 2-wire MIPI camera input. Operate l2C, CLK and RST signals at 1.8V voltage level    \u003c\/p\u003e\n\u003cp\u003eEthernet:Milk-V Duo includes CV1800B chip and 100Mbps physical layer. PHY connected to 5-pin pad. Ethernet use requires external transformer and RJ45 socket.    \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003eGPIOs:    \u003c\/p\u003e\n\u003cp\u003e[Up to 26 GPIO pins on the MilkV Duo 40-pin header to access internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART.    \u003c\/p\u003e\n\u003cp\u003eUp to 3xI2C    \u003c\/p\u003e\n\u003cp\u003eup to 5xUART    \u003c\/p\u003e\n\u003cp\u003eUp to 1xSDIO1    \u003c\/p\u003e\n\u003cp\u003eUp to 1xSPI    \u003c\/p\u003e\n\u003cp\u003eUp to 2xADC    \u003c\/p\u003e\n\u003cp\u003eUp to 7xPWM    \u003c\/p\u003e\n\u003cp\u003eUp to 1xRUN    \u003c\/p\u003e\n\u003cp\u003eUp to 1xJTAG    \u003c\/p\u003e\n\u003cp\u003eUSB interface:    \u003c\/p\u003e\n\u003cp\u003eCompatible with USB 2.0, backward compatible with USB 1.1    \u003c\/p\u003e\n\u003cp\u003eSupport for various speed modes, host\/device capabilities and transports    \u003c\/p\u003e\n\u003cp\u003eprotocol:    \u003c\/p\u003e\n\u003cp\u003eScalable interface via USB hub (up to 127 devices)    \u003c\/p\u003e\n\u003cp\u003ePower saving mode, support HID devices    \u003c\/p\u003e\n\u003cp\u003eUSB with configurable software    \u003c\/p\u003e\n\u003cp\u003eUSB Type-C for accessing storage media    \u003c\/p\u003e\n\u003cp\u003eMicro-SD:    \u003c\/p\u003e\n\u003cp\u003eSDIO 0 is compatible with the Secure Digital Storage (SD3.0) protocol    \u003c\/p\u003e\n\u003cp\u003eBoard Specifications:    \u003c\/p\u003e\n\u003cp\u003eSingle-sided PCB    \u003c\/p\u003e\n\u003cp\u003eThickness: 1mm    \u003c\/p\u003e\n\u003cp\u003eType-C port located on the top edge    \u003c\/p\u003e\n\u003cp\u003eDual Slotted\/Through Hole Headers Around Remaining Edge    \u003c\/p\u003e\n\u003cp\u003eAvailable as surface mount modules or in dual in-line package (DIP) format    \u003c\/p\u003e\n\u003cp\u003e40 primary user pins on 2.54mm (0.1inch) pitch grid with 1mm holes    \u003c\/p\u003e\n\u003cp\u003eCompatible with veroboard and breadboard    \u003c\/p\u003e\n\u003cp\u003ePlease note that due to different batches, there may be differences in the appearance, color, and printing of the product, which will not affect its use    \u003c\/p\u003e\n\u003cp\u003eColour: random color , don't accept the specified color    \u003c\/p\u003e\n\u003cp\u003eMaterial:PCB    \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003ePackage Contents:    \u003c\/p\u003e\n\u003cp\u003e1 x Development Board    \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003eOnly the above package content, other products are not included.    \u003c\/p\u003e\n\u003cp\u003eNote: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.   \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e         1 PCS RISC-V Milk-V Duo Development Board Dual Core CV1800B PCB Development Board Support Linux For Iot Enthusiasts DIY Gamers     \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003e       [Product Introduction] Milk-V Duo is an MPU developed based on CVITEK CV1800B chip that can run LINUX and RTOS.. Milk-V Duo provides professionals,IoT enthusiasts, hobbyists, DIYers a reliable, low-cost and extremely capable platform for building and tinkering with their ideas, helping them become Reality.    \u003c\/p\u003e\n\u003cp\u003e[Product parameters] Processor: CVITEK CV1800B (906@1GHz; 906@700MHz). Memory: DDR2 64MB. Storage: 1 Mirco-SD slot, 1 SD NAND pad. USB: 1 Type-C for data and power, 1 USB2 pad. Camera: 1 16P FPC socket (MIPI CSI 2 channels). GPIO : 26 pins available for general purpose I\/O (GPIO). Size: 21mm X 51mm    \u003c\/p\u003e\n\u003cp\u003eprocessor:. 1GHz and 70OMHZ RISC-V C906 processor.Integrate CVITEK TPU to realize intelligent detection. Support H.264\/H.265 video encoding, up to 2880x1620@20fps. Compatible with HD CMOS sensors. Programmable frequency output for sensor clock. Comprehensive ISP features for image optimization. Some OpenCV libraries support CV hardware acceleration. 16-bit audio codec with built-in microphone input and output. Flexible network configuration with 1 Ethernet PHY    \u003c\/p\u003e\n\u003cp\u003eCSI-2 (MIPI Serial Camera):With 16-pin FPC interface for 2-wire MIPI camera input. Operate l2C, CLK and RST signals at 1.8V voltage level    \u003c\/p\u003e\n\u003cp\u003eEthernet:Milk-V Duo includes CV1800B chip and 100Mbps physical layer. PHY connected to 5-pin pad. Ethernet use requires external transformer and RJ45 socket.    \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003eGPIOs:    \u003c\/p\u003e\n\u003cp\u003e[Up to 26 GPIO pins on the MilkV Duo 40-pin header to access internal peripherals such as SDIO, I2C, PWM, SPI, J-TAG, and UART.    \u003c\/p\u003e\n\u003cp\u003eUp to 3xI2C    \u003c\/p\u003e\n\u003cp\u003eup to 5xUART    \u003c\/p\u003e\n\u003cp\u003eUp to 1xSDIO1    \u003c\/p\u003e\n\u003cp\u003eUp to 1xSPI    \u003c\/p\u003e\n\u003cp\u003eUp to 2xADC    \u003c\/p\u003e\n\u003cp\u003eUp to 7xPWM    \u003c\/p\u003e\n\u003cp\u003eUp to 1xRUN    \u003c\/p\u003e\n\u003cp\u003eUp to 1xJTAG    \u003c\/p\u003e\n\u003cp\u003eUSB interface:    \u003c\/p\u003e\n\u003cp\u003eCompatible with USB 2.0, backward compatible with USB 1.1    \u003c\/p\u003e\n\u003cp\u003eSupport for various speed modes, host\/device capabilities and transports    \u003c\/p\u003e\n\u003cp\u003eprotocol:    \u003c\/p\u003e\n\u003cp\u003eScalable interface via USB hub (up to 127 devices)    \u003c\/p\u003e\n\u003cp\u003ePower saving mode, support HID devices    \u003c\/p\u003e\n\u003cp\u003eUSB with configurable software    \u003c\/p\u003e\n\u003cp\u003eUSB Type-C for accessing storage media    \u003c\/p\u003e\n\u003cp\u003eMicro-SD:    \u003c\/p\u003e\n\u003cp\u003eSDIO 0 is compatible with the Secure Digital Storage (SD3.0) protocol    \u003c\/p\u003e\n\u003cp\u003eBoard Specifications:    \u003c\/p\u003e\n\u003cp\u003eSingle-sided PCB    \u003c\/p\u003e\n\u003cp\u003eThickness: 1mm    \u003c\/p\u003e\n\u003cp\u003eType-C port located on the top edge    \u003c\/p\u003e\n\u003cp\u003eDual Slotted\/Through Hole Headers Around Remaining Edge    \u003c\/p\u003e\n\u003cp\u003eAvailable as surface mount modules or in dual in-line package (DIP) format    \u003c\/p\u003e\n\u003cp\u003e40 primary user pins on 2.54mm (0.1inch) pitch grid with 1mm holes    \u003c\/p\u003e\n\u003cp\u003eCompatible with veroboard and breadboard    \u003c\/p\u003e\n\u003cp\u003ePlease note that due to different batches, there may be differences in the appearance, color, and printing of the product, which will not affect its use    \u003c\/p\u003e\n\u003cp\u003eColour: random color , don't accept the specified color    \u003c\/p\u003e\n\u003cp\u003eMaterial:PCB    \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003ePackage Contents:    \u003c\/p\u003e\n\u003cp\u003e1 x Development Board    \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003eOnly the above package content, other products are not included.    \u003c\/p\u003e\n\u003cp\u003eNote: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.   \u003c\/p\u003e\n\u003cp\u003e    \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"mickcara","offers":[{"title":"Random Color","offer_id":41356012126345,"sku":"02487-1","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0365\/2131\/2393\/files\/b183015803626320d2c4ab7e3dde1f8f.jpg?v=1692414191","url":"https:\/\/mickcara.com\/products\/1-pcs-risc-v-milk-v-duo-development-board-dual-core-cv1800b-pcb-development-board-support-linux-for-iot-enthusiasts-diy-gamers","provider":"mickcara","version":"1.0","type":"link"}