[1] The product adopts Bluetooth 5.1 chip, which is more power-saving, low-latency, no noise, and realizes stable high-quality audio transmission. The intercom distance can reach 800~1000 meters. Full-duplex intercom Bluetooth headset (can carry on signal at the same time) Two-way transmission (A→B and B→A))    

 [2] The product can be connected to two mobile phones at the same time to realize the control of the basic functions of the mobile phone (receive calls, play music, radio and FM), and can also be connected with third-party Bluetooth headsets to meet all customer needs    

 [3] The product supports IOS, some Android system headset power display, check the power anytime, anywhere, at a glance    

 [4] The product is designed with IP67 high-level waterproof, even if it is used in rain or snow, it will not be affected at all    

 [5] The product adopts super large rotating parts and multi-function buttons, which is convenient and fast for riding operation, safe and reliable    

 [6] The product adopts CVC8.0 dual-meter noise reduction, DSP software algorithm intelligent quadruple noise reduction, with 2IN1 soft and hard labels and double-mark noise reduction function, the noise reduction effect is more perfect, and high-definition calls can be ensured when using at high speed. The line adopts fluid engineering streamlined design, which greatly reduces the wind resistance and achieves the coexistence of appearance and strength.    

 [7] The product uses a 800mAh super-capacity rechargeable polymer lithium battery, which can talk for up to 22 hours and stand by for 400 hours. It can be used and charged during riding to achieve both charging and use.    

 [8] The product is equipped with soft and hard two-in-one headsets, Velcro bottom clips, front and rear bottom clips, suitable for full helmets, half helmets, visor helmets, three-quarter helmets, off-road helmets, retro helmets and other different types of helmets Type, wide range of application    

 [9] The outer shell of the product is made of high-polished technology, non-rubber oil treatment, internal silicone inlay structure, so it can be deeply waterproof, light-resistant and durable    

 [10] Support pairing with 99% other brand Bluetooth intercom headsets and ordinary Bluetooth headsets on the market, support K line, connect to ordinary intercom    

 [Installation steps] details (graphic demonstration)    

 1. Loosen the screws on the back of the fixture with the provided screwdriver    

 2. Open the inner lining of the helmet, insert the clamp into a suitable position on the left side of the helmet and tighten the screw (over tightening the screw will damage the clamp)    

 3. Slide the machine into the clamp, make sure it is firmly locked    

 4. Open the inner lining of the helmet (at the ear position), clean the surface of the EPS, and stick the velcro on the rough surface    

 5. Stick the hook surface on the rough surface of the nylon buckle, and properly arrange the helmet lining    

 6. Insert the earphone plug into the corresponding earphone jack on the machine to complete the installation.