Description:

 1. Material: Made of ABS+HDPE, the bottle is thick, sturdy and durable.

 2. Electric water discharging: Electric water discharging, freeing hands, promoting the improvement of watering efficiency, saving time and effort.

 3. Two water outlet modes: Left and right rotation adjustment mode to meet the needs of different scenes. The direct-flow jet has a strong water output, while at the same time, the water output is reasonably controlled to avoid damage to the flowers; mist spraying, special nozzle casting technology, fine spray.

 4. Power indicator light: USB charging, the power level can be clearly understood according to the light situation, which is convenient and practical.

 5. Waterproof design: There is soft rubber protection at the interface to prevent water from entering.

 6. Noise reduction: High-density sound insulation material, double noise reduction protection.

 7. All-copper motor: All-copper motor, strong suction, stable operation of the motor, bringing a smooth and stable experience.

 8. Grip: Lengthened and thicker grip design, ergonomic design, comfortable to hold.

 9. Switch drive: Long press the switch to work, release the switch to stop. Double-click the switch twice to work, press once to stop.

 10. Applicability: Applicable liquids include water, alcohol, soapy water. Unsuitable liquids include oily liquids and liquids with sediment.

 Specifications:

 Product name: Electric Spray Bottle

 Color: Blue, white, green

 Material: ABS+HDPE

 Capacity: 900ml

 Charging method: USB

 Power by: Built-in 2000mAh battery

 Voltage: 3.7V

 Life time: 4-6 hours

 Size: About 108*115*280mm/4.25*4.53*11.02inch (bottom diameter * nozzle length * height)

 Package Includes:

 1Pc * Electric Spray Bottle

 1Pc * USB cable

 Note:

 1. After use, it must be washed with clean water, and work for a while after injecting clean water to drain the remaining liquid in the spray can.

 2. It is forbidden to immerse the machine in water or rinse, which may cause a short circuit of the machine.

 3. Do not use any solidified liquids. High temperature liquids at 40 degrees Celsius are not recommended. If used for spraying, it is recommended to clean them after use.

 4. After the liquid is poured, it must not be used upside down to prevent the liquid from flowing into the motor compartment and affecting the use.