Feature: 

 1. Applicable Models: This coolant pump is replacement for 3 series, 5 series, 7series, X3, X5, X6, replacement for 3 F30, F80 3201 2011/03-2019, replacement for 5 F 10 52015281 2009/01-2016/10, replacement for X1 E84 SDrive201 2009/03-2015/06, replacement for X3 F25 xDrive28i 2010/09-2017.   

 2. Main Application: The function of the water pump is to pressurize the coolant and ensure its circulation in the cooling system.   

 3. Ideal Replacement: The coolant pump should be changed regularly that this pump with excellent performance is an ideal replacement for your car.   

 4. Easy to Install: Comes with a compact size and complete accessories as well, the easy installation can be quickly completed.   

 5. Alloy Steel Material: Made of premium alloy steel material, this pump is strong and sturdy, not easy to deform, comes with a long service span.     

     Specification: 

     Item Type: Coolant Pump

 Material: Alloy Steel

 OE Number: 11518635089 

     Package List: 

     1 x Coolant Pump 

     3 x Screw 

     Note: 

         Precautions during emptying operation:    

         1. Keep the battery fully charged.    

         2. Drain the engine when it is cold.    

         3. It is strictly forbidden to open the water tank cover when the antifreeze temperature is very high, otherwise it may cause a safety accident of scalding.    

   How to use:       1. After replacing the electronic water pump, first use the diagnostic instrument to eliminate the history trouble codes related to the water pump.   

       2. Then exhaust the air from the cooling system as follows:   

       2.1 Fill up the antifreeze, cover the water tank, insert the key, and turn on the ignition switch (or press the START, STOP buttons without stepping on the brake).   

       2.2 When the air conditioner is set to the heating mode, the temperature is set to the maximum and the air volume is set to the minimum, it must be operated according to this, otherwise it cannot be evacuated.   

       2.3 Then step on the accelerator pedal to the bottom (note: do not start the vehicle). After about 10s, you can hear the sound of the electronic water pump running, and the evacuation procedure starts.   

       2.4 After about 3 minutes, the electronic water pump stops running and the emptying is completed.   

       2.5 Open the water tank cover and observe whether the cooling liquid level is between min and maximum. If it is less than min, add antifreeze and drain it again.