New Product SAIKE 898D+ Upgraded from SAIKE 898D Hot Air Gun Solder Iron Desoldering Station Many Free Accessories 

   Upgrade point of 898D+ 

   1.Soldering iron used long life ceramic heater A1321,warming rapidly. 

   2.Using pure copper transformer,low loss, low noise. 

   Attention please: 

   1.we will send you some free gifts as picture shown as below. 

   2.220V version processing time:ships out within 2 business days. 

   3.110V version processing time:ships out within 5 business days. 

   Sensor close loop, micro-computer over "0" control, LED indicator, big power, fast temperature rising, 

   accurate temperature, not affected by wind volume. 

   Wind volume is adjustable, suitable for many kinds of use. 

   Induction switch on hand held, when you grasp hand held, it will work, and when you put it down, it will stop work. 

   Auto cold wind function 

   Brushless wind motor, long life and low noise. 

   Suitable for SOIC, CHIP,QFP,PLCC,BGA, heating shrink, drying, lacquer removal, viscidity removal, ice-out,pre-heating 

   and glue soldering. 

   LED digital display accurancy 1°C 

   Consumption:700W 

   Voltage:220v or 110v(110v type can be customized for you,but need more time,about 6 days) 

   Air mode:brushless soft wind 

   Air volume:120L/minute(max.) 

   Temperature range:100-480°C 

   Handheld part length:more than 100cm 

   Main body: 13.8cmX10cmX15cm 

   Noise:<45dB 

    Purpose 

 1,Suitable soldering for:SOIC,CHIP,QFP,PLCC,BGA

 2,Function:Shrink, Drying, Paint Eraser, unfreezing, Pre-heating, glue soldering. 

   Specification: 

                      Hot Air Gun Station Specification 

                   MODEL 

         Rated Voltage 

         Power Consumption 

         Air Pump 

         Air Flow 

         Temp.Control 

         Length of Handle 

         Noise 

                   898D+ 

         AV110V/220V 

  50Hz/60Hz 

         700w 

         Non-Brushes Motor 

  Soft airflow 

         120L/min(Max) 

         100-480 

         more than 100cm 

         <45db 

                Soldering Iron Specification 

                Power Consumption 

        Out Voltage 

        Temp.Control 

        Ground Resistance 

        Heater Element 

                60W 

        28V AC 

        100-480 

        <2 

        Ceramic A1321 

  Note: 

  Do remember put the heat gun and iroan handles on the holder before power on the machine ,or else it does not work. 

  The iron indicator light will be on when heating, it goes into constant temperature when the light flashes.