1. Good Performance: Thermal tattoo stencil transper machine can provide fast transfer speed, clear transfer pattern, with high efficiency, low noise and stable performance.    

2. Heat Dissipation: Tattoo transfer machine bottom designed with heat dissipation holes for cooling machine, does not need to replace parts and ink, without bulb or cylinder.    

3. Simple Operation: Transfer copier cover is easy to open and close, effectively keeping the paper neat, just a few simple steps to copy the tattoo design on the paper, then copy the pattern onto skin.    

4. Strong Motor: tattoo pen adopted coreless motor, 4.2‑12V can be adjusted, with strong power, low noise and stable needle frequency, which can effectively reduce skin damage.    

5. Aluminium Alloy: tattoo machine made of aluminum alloy material, comfortable to grip and long time use without tired, built in 2400mAh lithium battery, charge for 2 hours and last for 4‑8 hours.    

    Specification:

Item Type: Thermal Tattoo Transfer Machine Pen Kit    

Material: ABS, aluminum alloy, electronic components     

Adapter: Input: 100-240V 50/60Hz/1.2A    

Scan Mode: CIS    

Effective Scan Width: Approx. 210mm / 8.27in    

Scanning Resolution:     

Horizontal: 8dot/mm, Vertical: 7.7line/mm    

Document Type: FINE/PHOTO    

Document Size: A5 to A4    

Document Thickness: 0.06mm-0.15mm    

Record Mode: TPH    

Effective Printing Width: Approx. 210mm / 8.27in    

Power Consumption: Standby 5W    

Operating Temperature: 5℃~35℃    

Relative Humidity: 20%-80%    

Transfer Machine Size: Approx. 293 x 171.5 x 72mm / 11.54 x 6.75 x 2.83in    

Different key combinations of different transfer modes.     

Depending on the type of manuscript, you can set different key combinations on the panel, choose different transfer modes.     

Key Combination:    

PHOTO: Pure black fine line manuscript light off, pure black block manuscript light off, lighter gray manuscript light on, darker gray manuscript light on.    

DEEPNESS 1: Pure black fine line manuscript light off, pure black block manuscript light on, lighter gray manuscript light off, darker gray manuscript light on.    

DEEPNESS 11: Pure black fine line manuscript light on, pure black block manuscript light off, lighter gray manuscript light on, darker gray manuscript light off.    

Note: 1. In order to obtain better transfer effect, the machine should rest for several minutes after 1 to 2 sheets of paper are transferred.     

2. In order to maintain the machine, please do not transfer it continuously. It is recommended to cool it after use.     

3. Tattoo template machine is not suitable for complex tattoo shader patterns, can only display a single tattoo effect.    

It is recommended to transfer lines and simple patterns for best results.     

2. Wireless Tattoo Pen    

Battery: Built In Lithium Battery 2400mAh    

Size: Approx. 134 x 33 x 33mm / 5.28 x 1.3 x 1.3in    

Needle Stroke: 3mm / 0.1in    

Suitable Needle: Most cartridge needles in the market    

Output Voltage: 4.2-12V (adjustment accuracy: 0.3V)    

Speed: 5V-5625rmp, 6V-6750rmp, 7V-7875rmp, 8V-9000rmp, 9V-10125rmp, 10V-11250rmp, 11V-12375rmp, 12V-13500rmp    

Wireless Power Supply Charger: 5V/1A, 5V/1.5A, 5V/3A, do not use 9V/1.5A, 9V/2A, 12V/1.5A, 12V/2A and other fast chargers, in order to avoid damage to the battery.    

Wireless Charging Time: 2 hours, 4-8 hours (8V) on a full charge.    

3. Tattoo Bandages     

Width: Approx. 5cm / 1.97in    

Length: Approx. 1.8m / 70.87in     

Use: Wrap tattoo pen to prevent slip.    

4. Quadruple A4 Tattoo Transfer Paper    

Purpose: Transfer the tattoo pattern to the tattoo part, which is convenient for the tattoo artist to trace, and improves the work effect and accuracy of the tattoo artist.    

Characteristics: A4 quadruple transfer paper, dual use for transfer machine or hand drawing, with clear transfer and full lines.    

Size: Approx. 29 x 21cm / 11.4 x 8.3in    

Quantity: 10pcs    

How To Use:    

Tattoo Transfer Copier    

1. Panel Description:     

DEEPNESS I: The indicator lights up and the manuscript concentration is set to depth I at the same time as DEEPNESS II     

The button indicator light will go off.     

DEEPNESS II: The indicator lights up, the manuscript concentration is set to depth II, and DEEPNESS I     

The button indicator light will go off.     

PHOTO: Press this key to switch between picture and fine. If it is picture, the indicator will light up.     

MIRROR: Press this key to switch between mirror copy and ordinary copy. MIRROR is used by default, if it is a mirror copy, the light will be on.     

STOP: Stops the transfer.     

COPY: After inserting the manuscript, press this key to start transferring.     

POWER: Power indicator, the indicator light will be on after the machine is powered on.     

ERROR: Indicates the error indicator. The indicator is on when the thermal sensor overheats.     

2. Adjust the scanning depth and transfer depth of the machine     

You can adjust the scan depth and print depth of the machine according to actual needs. The steps are as follows:     

(1) Long press the STOP button for 3 seconds, the machine drops a sound, and the indicators are all on.     

(2) Press STOP to adjust the scanning depth. Drop 1 is the deepest and beep 7 times is the shallowest.     

(3) Press COPY to adjust the transfer depth, drop 1 sound transfer the shallowest, beep 7 times is deepest.     

(4) Long press the STOP button for 3 seconds, the machine will beep, and the indicator light will recover, that is, the scanning and printing depth will be completed adjust.    

3. How to calibrate the machine     

Machine in the brightness of the image sensor and thermal sensor on the surrounding environment and temperature are very sensitive, will change with the passage of time and natural, copy image and the original image color difference is bigger, please scan the calibration, operation steps are as follows: (1) press the "STOP" button for 3 seconds, can hear the "beep" sound to the machine, all the lights lit up. (2)Insert a flat PIECE of A4 paper into the paper feeder and press the "MIRROR" key to scan and calibrate. (3) Automatic paper feeding during the calibration process, and complete scanning calibration after spitting out a complete white paper. (4) Press the "STOP" button for 3 seconds, hear the machine "beep", all indicators return to normal, that is, the calibration is completed.     

4. Usage     

(1) Power on and turn on the power switch.     

(2) Open the machine paper bin and turn over the board, and put the machine transfer paper from the transfer paper input port.     

(3) Place the manuscript pattern face down through the manuscript input.     

(4) Set the improved printing mode, press the start button to start the transfer.     

Wireless Tattoo Pen    

Long press the power switch of the machine to start/shut down, short press the "+" "-" button to adjust the voltage, the adjustment accuracy is 0.3V, short press the power button to pause/restart during operation.    

    Package List:

1 x Tattoo Transfer Machine    1 x Plug

    1 x Manual

    10 x Transfer Paper

    1 x Wireless Tattoo Pen

    1 x USB Charging Cord

    2 x Large Tattoo Bandage