Car Blind Spot Monitoring System Ultrasonic Blind Spot Detection System BSD Distance Assistant Car Lane Changing Warning Reversing Radar 

Features: 

2 IN 1 Function: Ultrasonic blind spot monitoring system with reversing radar. Lane change assist and Reversing assist. 

BSD Function Description: The basic working principle of BSD system based on ultrasonic sensor. Turn on the system when the vehicle is driving, and when a vehicle is approaching within the detection range of the ultrasonic sensor, the LED will emit light to remind, and when the turn signal is turned on to turn to change lanes, a sound and LED light-emitting reminder will be issued. 

Reversing Mode Function Description: The basic working principle of the reversing radar system based on ultrasonic sensors. During the reversing process of the vehicle, the reversing radar system is turned on, and an obstacle is found within the detection range set by the ultrasonic sensor, and a sound reminder is issued. 

Easy To Install: The installation height of the left and right 7-degree sensors is more than 0.60m, and the installation height of the two 0-degree sensors in the middle is 0.5-0.65m, otherwise the system may issue a false alarm signal. 

Packing List: Control box x1, Main harness x1, LED light extension cord x2, LED lights x2, Probe x4, Buzzer x1, Accessory bag x1, User manual x1. 

Specifications: 

BSD system: 

1.Optimum detection distance: 3.5m 

2.Detection accuracy: ±5cm 

3.Working frequency: 58KHZ±2KHZ 

4.Waterproof grade: IP67 

Reversing radar system: 

1. Detection distance: Both sides: 0-35-55cm. Middle: 0-35-90-120cm. 

2. Ranging accuracy: ±5cm 

3. Working frequency: 58KHZ±2KHZ 

4. Sensor detection range: Horizontal angle: 110°±15°. Vertical angle: 55°±15°. 

5. Sound: 85-105 decibels (at 10 cm) 

Controller: 

1. Working voltage: 10.6 to 16V 

2.Working current: Less than 80mA 

3.Working temperature: -40℃ to 80℃/-40℉ to 176℉ 

*It is recommended that the installation be carried out by professionals. 

Install: 

A.This product is suitable for 12V battery grounded models, please understand the product function before installation. 

B.To ensure proper wire length and easy wiring, place the control box on the left side of the luggage compartment. 

C.Please connect the lines according to the identification. 

Note:  

Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 10-30mm.